Ripple Hat And Scarf Free Crochet Pattern

0

Ripple Hat And Scarf Free Crochet Pattern

Designed by Mary Jane Protus.

Hat fits most women. Single crochetarf measures approximately

6” x 71”.

RED HEART® “Soft Yarn”: 1 Ball each 3720 Lavender

CA, 2541 Blue Sky CB, and 4601 Off White CC

Crochet Hook: 5.5mm [US I-9].

Yarn needle.

GAUGE: 14 sts (2 repeats) = 3½”; 6 rows = 4” in pattern.

CHECK YARN OVERUR GAUGE. Use any size hook to obtain the gauge.

SPECIAL ABBREVIATIONS:

CL2: Yarn over and draw up a lp in next dc, yarn over and draw through 2 lps, skip next 2 single crochet, yarn over and draw up a lp in next dc, yarn over and draw through 2 lps, yarn over and draw through all 3 lps rem on hook.

CL3: Yarn over and draw up a lp in next st, yarn over and draw through 2 lps, skip next 3 sts, yarn over and draw up a lp in next st, yarn over and draw through 2 lps, yarn over and draw through all 3 lps rem on hook.

Shell: (2 dc, chain 3, 2 dc) all in st or sp indicated.

Ripple Hat And Scarf Free Crochet Pattern Instructions

Scarf

With CA, chain 281.

Rnd 1 (Right Side): Single crochet in 2nd chain from hook, * chain 1, skip next 2 chain, shell in next chain, chain 1, skip next 2 chain, single crochet in next chain **, single crochet in next chain; rep from * across, end at **; turn to work on opposite side of beg chain; single crochet in same chain as last single crochet; rep from * across, end at ** changing to CB in last single crochet; join with a sl st to first single crochet – 40 chain-3 sps on each side.

Rnd 2: With CB, chain 1, single crochet in same single crochet as joining, single crochet in chain-1 sp, ** chain 3, dc in next 2 dc, shell in chain-3 sp, dc in next dc, * CL2, dc in next dc, shell in chain- 3 sp, dc in next dc; rep from * across first side; dc in next dc, chain 3, single crochet in ch-1 sp **, single crochet in next 2 single crochet, single crochet in chain-1 sp; rep from ** to ** across next side; single crochet in last single crochet changing to CC; join.

Rnd 3: With CC, chain 1, single crochet in same single crochet as joining, single crochet in next single crochet, single crochet in chain-3 sp, ** chain 3, skip next 2 dc, dc in next 2 dc, shell in chain-3 sp, dc in next dc, * CL3, dc in next dc, shell in chain-3 sp, dc in next dc; rep from * across first side; dc in next dc, chain 3, skip next 2 dc, single crochet in chain-3 sp **, single crochet in next 4 single crochet, single crochet in chain-3 sp; rep from ** to ** across next side; single crochet in last 2 single crochet changing to CA; join.

Rnd 4: With CA, chain 1, single crochet in same single crochet as joining and next 2 single crochet, 2 single crochet in chain-3 sp, ** chain 3, skip next 2 dc, dc in next 2 dc, shell in chain-3 sp, dc in next dc, * CL3, dc in next dc, shell in chain-3 sp, dc in next dc; rep from * across first side; dc in next dc, chain 3, skip next 2 dc, 2 single crochet in chain-3 sp **, single crochet in next 6 single crochet, 2 single crochet in chain-3 sp; rep from ** to ** across next side; single crochet in last 3 single crochet; join. Fasten off.

See Also:

ripple hat and scarf free crochet pattern
ripple hat and scarf free crochet pattern

HAT

With CC, chain 4; join with sl st in first chain to form ring.

Rnd 1: Chain 3, 13 dc in ring; join with sl st in top of chain-3 –14 sts.

Rnd 2: Chain 3, dc in same st as joining, [2 dc in next dc]13 times; join – 28 sts.

Rnd 3: Chain 3, [2 dc in next dc, dc in next dc] 13 times, 2 dc in last dc; join – 42 sts.

Rnd 4: Chain 3, [2 dc in next dc, dc in next dc] 20 times, 2 dc in last dc; join – 63 sts.

Rnd 5: Chain 1, single crochet in same st as joining, * chain 1, skip next 2 dc, shell in next dc, chain 1, skip next 2 dc, single crochet in next dc **, single crochet in next dc; rep from * around, end at **; join in first single crochet – 9 chain-3 sps.

Rnd 6: Sl st in sp, sl st in next 2 dc, chain 3, * shell in chain-3 sp, dc in next dc, CL2 **, dc in next dc; rep from * around end at ** and working 2nd leg of CL2 in first dc of previous rnd; join in top of chain-3.

Rnd 7: St in next 2 dc, chain 3, * shell in chain-3 sp, dc in next dc, CL3 **, dc in next dc; rep from * around end at ** and working 2nd leg of CL3 in first dc of previous rnd; join.

Rep Rnd 7 four more times. Fasten off.

Brim-Next Rnd: With WRONG SIDE facing (this will be the right side when brim is turned up), attach CA in 2nd dc of shell; chain 3, * shell in chain-3 sp, dc in next dc, CL3 **, dc in next dc; repeat from * around end at ** and working 2nd leg of CL3 in first dc of previous rnd; join. Fasten off.

Rep last rnd 6 more times in following color sequence: [CB, CC, CA] twice.Weave in ends.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Enter Captcha Here : *

Reload Image